Công tắc hành trình Schmersal TZ 064-21Y

Thông số kỹ thuật công tắc TZ 064-21Y:

Ordering details
Product type description Schmersal TX 064-21Y
Article number Schmersal 101057472
EAN code 4030661026985
eCl@ss 27-27-06-01
Approval CCC
Global Properties
Product name 064 Rollenhebel X
Standards EN 60947-5-1
Compliance with the Directives (Y/N) Yes
Suitable for safety functions (Y/N) No
Standard housing (Y/N) No
– Material of the housings cast iron, galvanized
– Roller material Plastic
– Material of the contacts Silver
Housing coating painted
Weight 3505 g
Slide form Castor
Mechanical data
Design of electrical connection Screw connection
Cable section
– Min. Cable section 1.5 mm²
– Max. Cable section 4 mm²
AWG-Number 11
Active principle mechanical
Mechanical life 1.000.000 operations
Switching frequency max. 1000 /h
notice All indications about the cable section are including the conductor ferrules.
Design of actuating element Offset roller lever
Contact opening 2 x 4 mm
Actuating speed with vertical actuating angle to switch axis
– Min. Actuating speed 0,01 m/s
– Max. Actuating speed 1 m/s
– Actuating angle from left of switch axis 30°
– Actuating angle from right of switch axis 45°
Ambient conditions
Ambient temperature
– Min. environmental temperature −30 °C
– Max. environmental temperature +90 °C
Protection class IP65 to IEC/EN 60529
Electrical data
Design of control element Normally open contact (NO) Opener (NC)
– with double break
Switching principle Creep circuit element
– positive break NC contact
Number of shutters 2 piece
Number of openers 1 piece
Rated impulse withstand voltage Uimp 6 kV
Rated insulation voltage Ui 500 V
Thermal test current Ithe 25 A
Utilisation category AC-15: 400 V / 25 A
Max. fuse rating 16 A gL/gG D-fuse
Dimensions of the sensor
– Width of sensor
– Height of sensor 107 mm
– Length of sensor 149 mm
Roller wide 6.5 mm
Roller diameter 25 mm

Công tắc hành trình 4N.C, 2 right – 2 left. (TD250-02/02Z) SCHMERSAL